Motor Thermal Protector (KSD9700)

KSD9700 series thermal protector range of applications
Ballast
Fluorescent
Motor
Transformers
Laminator
Rechargeable battery
Solenoid
Appliances
PCB board
KSD9700 series thermal protector works
KSD9700 series is a double metal as the temperature sensing thermostat, Electrical work, the double-metal free state, Contact is closed / disconnected state, when the temperature rises to action temperature, the bimetallic element to heat stress and rapidly generate action Open / close contact, off / on the circuit, and thus play a role in thermal protection. When getting down to re-set temperature is the degree of contact auto open / close, return to normal working condition.
KSD9700 series thermal protector product advantages
Small size, easy to install
Snap-action bimetal, fast response
Life of up to 10, 000 times
Anti-vacuum impregnation process
Alternative SENSATA 17AM 7AM, South Korea, SEK ST-22 and other foreign products
KSD9700 series thermal protector Specifications
Contact form: Normally open, normally closed
Contact capacity (15A/12VDC 12A/24VDC 10A/120VAC 8A/250VAC)
Normal contact resistance ≤ 50MΩ
Insulation resistance ≥ 100MΩ

Model
Long(MM)
Wide(MM)
High(MM)
20-Steel
20
7.4
3.8
20-Plastic
20
8.0
4.2
15-Steel
15
6.7
3.2
15-Plastic
15
7.2
3.8

Operate or reset the control table
Temperature range 45-160C
Special specifications can be developed according to customer requirements
KSD9700 series thermal protector Notes
Using contact temperature-type installation, should be The product snapping charged with apparatus mounting surface.
Installation of plastic or metal can not be collapsed or distort, so as not to affect performance.
metal products with added insulation jacket of the installation can not be removed without the external insulating sleeve or crushed, to avoid leakage, ensure safe use.
Product is not greater than 5A current in the circuit, should be selected cross-section of 0.4-0.75 mm 2 copper wire connected to it.
Product should be less than 90% relative humidity, ambient temperature below 40 C ventilation, clean, dry, non-corrosive gas in storage.